Troubleshooting your Teburu LED Ring

The following are the most common problems you can encounter with your Teburu LED Ring.

• My Teburu LED Ring doesn’t turn on.
  • Check the charge level of the LED Ring by connecting it to the power supply via USB-C cable.
  • Be sure that the Boss-sized Miniature is correctly inserted inside the Teburu LED Ring.
• My Teburu LED Ring doesn’t connect to the game app.
  • Verify that the Teburu LED Ring is correctly turned on and in searching mode. The correct sequence of LED colors must be as follows:
    • the 4 white LEDs light up in sequence, starting from the one in front of the Boss-sized Miniature, and remain lit
    • all LEDs turn off
    • the green LEDs flash twice to indicate the charge (4 full charge, 1 low charge)
    • the searching animation begins: a white LED lights up, one after the other.
  • Make sure your turned on Teburu Core is the only one waiting for a Teburu LED Ring.
• My Teburu LED Ring is not charging.
  • Check that the USB-C cable is correctly inserted inside the Teburu Core.
  • Check that the USB-C cable is properly connected via an adapter to the power outlet. Different power sources are permitted, as long as there is at least a stable voltage of 5 V and 250 mA.
  • Remove the Boss-sized Miniature from the Teburu LED Ring and verify that the LED colors sequence is the following:
    • the 4 white LEDs light up in sequence and remain lit
    • all LEDs turn off
    • the green LEDs flash twice to indicate the charge (4 full charge, 1 low charge)
    • every 10 seconds the battery level is refreshed and the green LEDs flash twice to indicate that it’s charging.